CRL-Blumcraft® Vertical Adjustable Hand Rail Corner Splice Stablizing (6 to 12 mm)

(6 to 12 mm)

Includes: Rubber Gaskets and Steel Pin (for optional use) with GrommetReplacement Hardware: CRL P612 for Replacement ScrewsProduct Warning:For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage

This CRL 90 Degree Flush Angle End 1-1/2" Tubing easily slips into our hand rail tubing

For gates higher than 48" (1

Works with TL5X10 TAPER-LOC®'X' Taper S

CRL-Blumcraft® Vertical Adjustable Hand Rail Corner Splice Stablizing (6 to 12 mm)This CRL Blumcraft Vertical Adjustable Splice Connector are used to splice together mitered corners of Blumcraft hand rails. These spice connectors slip inside the bottom channel, then the four set screws are tighten to join the two mitered pieces together. Available in three architectural finishes.